Indesit FIE 76 KC.A IX GB/1, FIE 76 KC.A GB/1 Installation, Positioning, Electrical connection

Installation

￿ Before placing your new appliance into operation

GB	please read these operating instructions carefully.
	They contain important information for safe use, for
	installation and for care of the appliance.
	￿ Please keep these operating instructions for future
	reference. Pass them on to possible new owners of
	the appliance.

Positioning

￿Keep packaging material out of the reach of children.￿It can become a choking or suffocation hazard. see Precautions and tips).

!The appliance must be installed by a qualified person in compliance with the instructions provided. Incorrect installation may cause harm to persons, animals or may damage property.

Fitting the appliance

Use the appropriate cabinet to ensure that the appliance functions properly.

•The panels adjacent to the oven must be made of heat-resistant material.

•Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.

•To install the oven under the counter (see diagram) and in a kitchen unit, the cabinet must have the following dimensions:

Ventilation

To ensure good ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).

.	45	mm
m			.
m
560

Centring and fastening

Secure the appliance to the cabinet by opening the oven door and putting 4 screws into the 4 holes of the outer frame.

!All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.

	23 mm.
595 mm.	567 mm.
	5 mm.

595			.
	mm.	545	mm
	.
	mm
24

					.
				in
			.m
		m
	7m
4
5
				.
45		mm
		558		mm.

593 mm.

Electrical connection

!Ovens with a three-pole power supply cable are designed to operate with alternated current at the supply frequency and voltage indicated on the data plate (at the bottom of the oven dashboard). The earthing conductor of the cable is the yellow-green conductor.

Two types of connection are provided:

!The appliance must not come into contact with electrical parts once it has been installed.

The consumption indications on the data plate have been calculated for this type of installation.

Connection n° 1

Connecting the power supply cable to the mains.

Fit a normalized plug to the cable, which corresponds to the load indicated on the data plate;

2