How to use your dryer

1.Plug in, switch on electricity.

WARNING: WHEN SWITCHING ON OR OFF, PLEASE ENSURE THAT YOUR HANDS ARE DRY

2.Sort your laundry (see section “Sorting Your Laundry”)

3.Open the door by pressing and releasing the front panel in the position shown.

4.Always check the following:

FLUFF FILTER

is clean and in place

WATER CONTAINER is empty and in place

CONDENSER

is clean and in place

5.Load the dryer placing the clothes carefully in the drum pushing them well towards the back and away from the door seal. Close the door.

6. Select the alarm,

7. Select the

if required.

required programme

(see section “The

or drying time.

Controls”)

(see section “The

 

Controls”)

8.Press the

START switch to commence the drying programme.

9.When finished open the door and take out the laundry. Clean and replace the fluff filter, and empty the water container.

10.Switch off electricity and remove plug from socket.

WARNING: WHEN SWITCHING ON OR OFF, PLEASE ENSURE THAT YOUR HANDS ARE DRY

Removing Items

By opening the door you can check the dryness of the load as often

 

as you wish and if you want, remove some items before they are

 

fully dry. (This is particularly useful for a mixed load where you want

 

to iron some items, but others are to be fully dried.) You will need

 

to press the start button after closing the door to re-start the

 

programme. See section ‘The Controls’.

8

Page 8
Image 8
Indesit G85C manual How to use your dryer, Removing Items