Indesit G85C manual Caring for your Dryer, Every Week, Every Month, Do not use, Lubrication

Caring for your Dryer

	Your Tumble Dryer needs very little attention. The following simple
	steps will keep it performing well.
When finished	Switch off electricity and remove plug. Ensure hands are dry.
After each load	Always clean the filter, by rinsing under the tap or using a vacuum
	cleaner. Turn the dryer by hand to check that small items like hand-
	kerchiefs do not get missed. Always empty the water container.
Every Week	Wipe the drum and seal with a damp cloth.
		Fluff filter
				Sensor
					Tap
					Rear
					Front
			Condenser
Every Month	Remove condenser unit and clean any build up of fluff from between
	the plates by rinsing it under the tap with cold water. This should be
	done with cold water from the rear of the condenser. Refit with the
	handle at the front.
	Occasionally clean the surface of the stainless steel sensor inside the
	drum with vinegar to remove water contaminates. Apply carefully with
	a cloth this will maintain the drying performance of the dryer. The
	sensor is approx 50mm (2") round and located between the vanes of
	the drum towards the front of the dryer, rotate the drum if necessary
	to locate it.
Cleaning	Every 6 months vacuum the front air intake grille and Vents at the rear
	of the dryer, to remove the build up of fluff, lint or dust.
	To remove accumulation of fluff from the door, front of condenser and
	filter areas, clean occasionally with a vacuum cleaner.
Do not use	Abrasive cleaners, scouring agents, acids, chlorine bleach or metal
	polish to clean any part of the machine.
Lubrication	Your tumble dryer uses special bearing components. Lubrication by
	the user is not necessary and must not be attempted.
	We strongly recommend that all appliances are regularly checked for
	electrical and mechanical safety.

17