EN
11
Troubleshooting

Possible causes / Solutions:

The plug has not been inserted far enough into the socket to make contact.
There has been a power cut.
The fuse has blown. Try connecting another appliance to the same socket.
If an extension cord is used, try connecting the dryer plug directly into the socket.
The door has not been closed properly.
The programme has not been set correctly (see How to carry out a drying cycle).
The START button has not been pressed (see How to carry out a drying cycle).
The filter has not been cleaned (see Care and maintenance).
The water container must be emptied? The Empty water container indicator light is
on (see Care and maintenance).
The condenser needs to be cleaned (see Care and maintenance).
An incorrect drying time was selected for the type of load (see Laundry).
The air intake grille is blocked (see Installation and Care and Maintenance).
The items are too wet (see Laundry).
The dryer is overloaded (see Laundry).
This is normal, especially if the dryer has not been used for a long time. If the noise
persists during the entire cycle, contact the Technical Assistance Centre.
If you feel that the dryer is not working properly, consult the following troubleshooting suggestions before contacting the Technical
Assistance Centre (see Assistance).

Problem:

The dryer does not start.
Drying times are too long.
The dryer is noisy during the first
few minutes of operation.