Indesit IWD 7145 S manual First wash cycle, Disposing of the appliance

	As the colours of the wires in the lead may not
GB
	correspond with the coloured markings iden-
	tifying the terminals in your plug, proceed as
	follows:
	Connect Green & Yellow wire to terminal
	marked E or		or coloured Green or Green &
	Yellow.
	Connect Brown wire to terminal marked L or
	coloured Red.
	Connect Blue wire to terminal marked N or co-
	loured Black.
	If a 13 amp plug (BS 1363) is used it must be
	fitted with a 13 amp fuse, either in the plug or
	adaptor or at the distribution board.
	If you are in any doubt regarding the electrical
	supply to your machine, consult a qualified
	electrician before use.
	How to connect an alternative plug:
	The wires in this mains lead are coloured in
	accordance with the following code:
	BLUE			NEUTRAL (N)
	BROWN			LIVE (L)
	GREEN & YELLOW			EARTH (E)
		GREEN &
		YELLOW
		BROWN	13 ampere fuse
		BLUE	CROSS-BAR
			CORD GRIP

Disposing of the appliance:

When disposing of the appliance please re- move the plug by cutting the mains cable as close as possible to the plug body and dispo- se of it as described above.

!The washing machine should not be installed in an outdoor environment, not even where the area is sheltered, because it may be very dangerous to leave it exposed to damp, rain and thunderstorms.

!When the washing machine is installed, the mains socket must be within easy reach.

!Do not use extensions or multiple sockets.

!The power supply cable must never be bent or dangerously compressed.

!The power supply cable must only be repla- ced by an authorised serviceman.

Warning! The company denies all liability if and when these norms are not respected.

The first wash cycle

Once the appliance has been installed, and before you use it for the first time, run a wash cycle with detergent and no laundry, using the wash cycle 1.

4