Black & Decker BDCD220RS Troubleshooting, Drilling in Metal, Drilling in Masonry, Maintenance

DRILLING IN METAL
Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which
should be drilled dry.The cutting lubricants that work best are sulfurized cutting oil or lard oil.
DRILLING IN MASONRY
Use carbide tipped masonry bits. Refer to Drilling section. Keep even force on the drill but
not so much that you crack the brittle material. A smooth, even flow of dust indicates the
proper drilling rate.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
IMPORTANT:To assure product SAFETY and RELIABILITY,repairs, maintenanceand
adjustment (other than those listed in this manual) should be performed by authorized
service centersor other qualifiedservice personnel, always using identical replacement parts.
Problem	TROUBLESHOOTING		Possible Solution
	PossibleCause
• Unit willnot start.	• Batterypacknot installed	• Checkbatterypack
	properly.	installation.
	• Batterypacknot charged.	• Checkbatterypack charging
• Battery packwill not	• Batterypacknot insertedinto	requirements.
		• Insertbatterypackinto
charge.	charger.	chargeruntilgreen LEDappears.
	• Charger notpluggedin.	• Plugchargerinto a working
		outlet. Referto“ImportantCharging
	• Surroundingair temperature	Notes” formoredetails.
		• Movechargerand battery
	too hot or toocold.	packtoa surrounding air temperatureof
		above 40degreesF (4.5°C) orbelow
• Unit shutsoffabruptly.	• Batterypackhas reached its	105 degreesF (+40.5°C).
		•Allowbatterypack tocool
	maximum thermalimit.	down.
	• Outof charge.( To	• Placeon charger and
	maximizethe lifeofthe	allowtocharge.
	batterypackitisdesigned
	toshutoffabruptlywhen
	thechargeisdepleted).

For assistance with your product, visit our websitefor the location of the service center nearest you or call thewwwBLACK.blackanddecker& DECKER help.comline at

ACCESSORIES1-800-544-6986.

Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories,please call:

1-800-544-6986.

hazardousWARNING:. The use of any accessory not recommended for use with this tool could be

TheThe RBRC™BRC™(RechargeableSeal Battery Recycling Corporation) Seal on the lithium-ion battery (or battery pack) indicates that the costs to recycle the

battery (or battery pack) at the end of its useful life have already been paid by Black & Decker. In some areas, it is illegal to place spent lithium-ion batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative.

RBRC in cooperation with Black & Decker and other battery users, has established programs in the United States and Canada to facilitate the collection of spent lithium-ion batteries. Help protect our environment and conserve natural resources by returning the tool to an authorized Black & Decker service center for recycling. You may also contact your local recycling center for information on where to drop off the spent battery,or cal

1-800-8-BATTERY.11