Indesit KD3C1/G manual Installation, Warning - This Appliance Must Be Earthed

Models: KD3C1/G

1 28
Download 28 pages 51.57 Kb
Page 4
Image 4
Installation

Installation

WARNING – THIS APPLIANCE MUST BE EARTHED.

Electrical connection

Electric cookers come without a power supply cable. The cooker is designed to operate on an electricity supply which conforms to the electrical data shown on the Rating Plate. The cooker can be connected to the mains only after removing the back panel of the cooker itself with a screwdriver.

N.B.: the following installation procedure must be carried out by a qualified electrician. The electrical installation must comply with the IEE Regulations, Building & local By-Lays.

For the installation of the feeding cable carry out the following operations:

1 Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram).

2 Loosen the cable clamp screw and remove it, using a screwdriver as a lever (see figure).

3Remove the wire contact screws L-N-WARNING – THIS APPLIANCE MUST BE EARTHED., then fasten the wires under the screw heads, respecting the colour code: Black/Blue (N), Red/Brown (L) and Bare Wire/ Yellow-Green (Manual background).

l Once the connections have been made, tighten all the terminal screws fully.

l Fasten the supply cable in place with the clamp and close the cover of the terminal board.

4

Page 4
Image 4
Indesit KD3C1/G manual Installation, Warning - This Appliance Must Be Earthed