Indesit PIM 604GB manual Electrical connection

Electrical connection

The following installation procedure must be carried out by a qualified electrician.

!the cooker must be connected to the mains by a switched (double pole) cooker outlet correctly fused with a capacity appropriate to that shown on the hob Rating Plate. All electrical wiring from the consumer unit to the appliance, via the switched double pole cooker outlet, must be of an acceptable type and current rating as above. The supply cord, type H05 VV-F 3x2.5mm2, must be positioned so that it never reaches at any point a temperature 50°C higher than the room temperature. The electrical installation must comply with the IEE Regulations, Building Regulation & local By-Lays.

!THIS APPLIANCE MUST BE EARTHED.

Supply cable installation

GB

The electrcic hobs are supplied without cable. Use a cable:

H05 VV-F 3x2.5mm2

•Open the terminal box by removing the "V" screw and taking off the cover.

•The wires in the mains lead are coloured in accordance with the following code: Green & Yellow - Earth “E”

Blue - Neutral “N”

Brown - Live “L”

Connect the wires in accordance with the following diagram

1 2 3 4 5

LN

•Fix the cable in place with the "F" cable clamp, close the lid and fasten it with the "V" screw (see picture).

In the case of installation over a built-in electric oven the electrical hook-up of the stove top and that of the oven should be separate, for reasons of safety as well as for ease of eventual removal of the oven.

V

1	2	3	4	5
				F

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

3