Indesit PWDE 8147 S Wash cycles and options, Table of wash cycles, Wash options, Easy iron

Wash cycles and options

Table of wash cycles

cycles		Max.	Max.			Detergents		Max. load	Cycle
Wash	Description of the wash cycle	temp.	speed	Drying				(kg)	duration
							Fabric
		(°C)	(rpm)		Main wash
							softener
	Daily Programmes
1	White Cotton: extremely soiled whites.	90°	1400					8
1	White Cotton (1): heavily soiled whites and resistant colours.	60°	1400					8	The
1	White Cotton (2): lightly soiled whites and delicate colours.	40°	1400					8
2	Cotton: heavily soiled whites and resistant colours.	60°	1400					8	duration
3	Coloured Cotton (3): lightly soiled whites and delicate colours.	40°	1400					8
4	Synthetics: lightly soiled resistant colours.	40°	800					3.5	of
5	Jeans	40°	800					4	the
6	Shirts	40°	600					2	wash
7	Wool: for wool, cashmere, etc.	40°	800					2
									cycles
	Special cycles
8	Delicates: for garments in silk and viscose, lingerie.	30°	0	-				2	can
9	Duvet: for down-stuffed garments	30°	1000	-				3
									be
10	Sport Shoes	30°	600	-				Max.
								2 pairs	checked
	Dry cycles
11	Cotton	-	-		-		-	6	on
12	Synthetics	-	-		-		-	3.5
									the
13	Wool	-	-		-		-	2
									display.
	Partial cycles
	Rinse	-	1400		-			8
	Spin	-	1400		-		-	8
	Drain	-	0	-	-		-	8

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.

For all Test Institutes:

1)Test wash cycle in compliance with regulation EN 50229: select wash cycle 1 with a temperature of 60°C.

2)Long wash cycle for cottons: select wash cycle 1 with a temperature of 40.

3)Short wash cycle for cottons: select wash cycle 3 with a temperature of 40.

GB

Wash options

The “PRIME” technology optimises energy, water and time consumption according to the quantity of garments actually inserted in the machine. Moreover, pressing the button allows for selecting the following options:

-Water: allows for reducing water consumption without having to renounce impeccable results (recommended for heavily soiled garments).

-Energy: automatically selected by “PRIME”, this option reduces energy consumption (recommended for normally soiled garments).

-Time: allows for reducing wash cycle duration (recommended for lightly soiled garments).

!This may only be used in conjunction with wash cycles 1, 2, 3, 4 (all three levels) and 5, 6 (Energy and Time levels).

Easy iron

By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washer-dryer will perform slow rotations of the drum, while the EASY IRON and START/PAUSE indicator lights will flash (blue and orange respectively). To end the cycle, press the START/PAUSE button or the EASY IRON button. For wash cycles number 8, the machine will end the cycle while the laundry is soaking; the

EASY IRON and START/PAUSE indicator lights will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the EASY IRON button.

!It cannot be used in conjunction with wash cycles 7, 10, 11, 12, 13, , , .

Note: If you also want to run the drying cycle, this option is enabled only if combined with level “A1” (Iron dry).

Cool Wash

The Cool Wash function saves energy by not heating the water used to wash your laundry – an advantage both to the environment and to your energy bill. Instead, intensified wash action and water optimisation ensure great wash results in the same average time of a standard cycle. For the best washing results we recommend the usage of a liquid detergent.

!It cannot be used in conjunction with wash cycles 6, 7, 8, 9, 10, 11, 12, 13, , , .

Delay Timer

To set a delayed start for the selected cycle, press the corresponding button repeatedly until the required delay period has been reached. When this option is enabled, the corresponding indicator light will remain lit. To remove the delayed start setting, press the button until the text “OFF” appears on the display.

!This option can be used in conjunction with all cycles.

11