Figure 2. Speaker connection.
CONNECTIONS USING A STEREO AMPLIFIER
(Continued)
Using one length of speaker connecting wire, connect the RIGHT speaker to your amplifier’s (or receiver’s) RIGHT channel output terminals. Be sure that strands of the wire do not touch the ground terminal (and be sure to observe polarity). Even a thin stray wire can cause distortion in the system that would be very difficult to trace. Speaker Positive should be connected to amplifier Positive and speaker Negative to amplifier Negative. Connect the LEFT speaker to your amplifier’s LEFT channel output terminals in a similar manner. (See fig- ure 2.)
OMEGA
–+
+
EMIT | flat |
| |
| - | LEFT | |
|
| SPEAKER | |
EMIM | flat |
| |
- | AMPLIFIER | ||
| |||
– |
| + |
L.F. | LEFT | RIGHT |
| – + | – + |
NORTHRIDGE, CALIFORNIA, USA
