WIRE CODES
WOOFER INSTALLATION | TWEETER INSTALLATION |
Tweeter level +3dB
Tweeter level 0dB
KX00
+0db +3dB
+ IN - + W - + T -
To amplifier | To tweeter | |
To woofer | ||
speaker output | ||
|
Figure 2
Connect the speakers and amplifier to the crossover as shown.
|
| – |
Figure 3 | Figure 4 | + |
|
| 1 |
|
| 2 |
Fasten the midrange through the plastic grille | Mounting the tweeter using the |
tray with the screws and clips provided. | |
Press the metal mesh in place in the tray. |
|
| Figure 5 |
Figure 6
3
ROTATE TO AIM
ANGLED TWEETER
TO LISTENER
1
SLIDE UP OR DOWN
TO ADJUST TWEETER
ANGLE
2
TIGHTEN NUT AND
WASHER TO LOCK
THE ANGLE SETTINGS
Aim the tweeter at the listening position by sliding the stud in the groove on the back of the tweeter cup and rotating the entire assembly in the mounting surface. Lock the tweeter in place using the small retaining nut and the large plastic mounting nut.
1
2
Mounting the tweeter using the
- 3 -