Infinity HPS-1000, HPS-500 Receiver/Amplifier Or Processor/Amplifier, Highpass L Output

HPS500/1000 OM 10/25/99 2:40 PM Page 11

If your receiver/amplifier has preamp output jacks and main input jacks for the left an right channels or you have a separate preamp/processor and power amplifier:

This method of hookup can offer the highest level of performance for your complete loudspeak system. Your subwoofer incorporates an adjustable high-pass crossover in addition to a variab low-pass crossover. When hooked up as shown below, the subwoofer will limit the low-frequenc information that is returned to your receiver/amplifier. Your receiver/amplifier does not need waste valuable power reproducing the low frequencies. In addition, since no low-frequenc information is being sent to your main loudspeakers, they are able to reproduce mid and hig frequencies with greater clarity.

LOW LOW

LEVEL LEVEL

OUT IN

HIGHPASS L

OUTPUT

120Hz

160Hz R 80Hz

RECEIVER/AMPLIFIER

OR PROCESSOR/AMPLIFIER

PRE MAIN

OUT IN

LEFT

RIGHT

LOUDSPEAKER

RIGHT

MAIN SPEAKER

OUTPUT

RIGHT LEFT

LEFT

LOUDSPEAKER