HPS500/1000 OM 10/25/99 2:40 PM Page 10
NOTE: Some receivers have a single subwoofer output (do not confuse this with a single LFE output as described below). In that case, it is recommended that you use a Y connector (not included) to maximize performance.
CONNECTING YOUR SUBWOOFER (Continued)
If your receiver/processor has subwoofer outputs for the left and right channels:
LOW LOW
LEVEL LEVEL
OUT IN
HIGHPASS
OUTPUT
120Hz
L
NOTE: In this case, you do not need to use a Y connector. Simply connect the LFE output on your receiver/processor to either the left or right input on the subwoofer.
160Hz R 80Hz
If you have a Dolby* Digital or DTS® receiver/processor with a
SUBWOOFER OR
LFE OUTPUT
LOW LOW
LEVEL LEVEL
OUT IN
L
HIGHPASS
OUTPUT
120Hz
160Hz R 80Hz