Infinity NV29 manual Date Purchased, Component Maintenance Schedule Cyclonic Chamber, Hepa Filter

Proper Care of Your Infinity Upright Vacuum

Date Purchased:

For proper care, consult the table to the right for the maintenance schedule of your Cyclonic Chamber and Filters.

Lock vacuum into upright position.

Turn vacuum off.

CAUTION: Unplug the vacuum; failure to do so might result in electric shock.

Remove Dust Cup Assembly.

1

2

3

Component		Maintenance Schedule
1	Cyclonic Chamber	Empty every 3 to 5 months, under normal use
2	Foam and Felt Filters (2)	Wash every 3 to 5 months, under normal use
3	HEPA Filter	Tap clean every 3 years for optimum performance

1Cleaning the Cyclonic Chamber:

Twist Cyclonic Chamber to the left (counter clockwise) to unlock and separate from Dust Cup (a).

Press Cyclonic Chamber Release Button to open the bottom door (b).

Gently tap open Cyclonic Chamber over trash receptacle to release dust and then close chamber door.

Position Cyclonic Chamber onto Dust Cup; line up the solid arrows on the back (c).

Twist Cyclonic Chamber to the right (clockwise) until the top solid arrow lines up with the bottom open arrow (d) to lock.

b

c a

d

2Washing the Foam and Felt Filters:

Remove the Foam and the Felt Filters from the Filter Holder.

Rinse in lukewarm water until water runs clear.

Squeeze filters and let air dry for 24 hours before replacing; do not use hairdryer or other heating methods to dry. Insert replacement filters while others are drying.

DO NOT operate the vacuum without ALL the filters in place.

DO NOT operate vacuum with WET filters.

3Cleaning the HEPA Filter:

Lift up the Foam/Felt Filter Holder to access the HEPA Filter.

Lift out the HEPA Filter Unit.

Tap vigorously against a firm surface to dislodge residual dust particles.

NOTE: Your white Foam, Felt,and HEPA Filters will discolor over time; this is normal and will not affect the performance of the filters.

www.infinityvac.com

11