TROUBLESHOOTING
APPRENEZ À CONNAÎTRE VOTRE BALAYEUSE CYCLONIC
8.Once having removed the brush roll completely, you will be able to easily remove the belt from the motor driven shaft. (Fig. 53)
Fig. 53
9.Slide one end of the new belt over the drive shaft, and the other end of the belt around the brush roll. Secure the left side of the brush roll into place, and then the right side. Check to make sure that the belt is completely centered on the motor driven shaft and that the brush roll turns smoothly.
10.Replace the locking clip. Make sure that the bottom part of the belt is under the bottom part of the locking clip.
11.To replace the belt and brush roll cover, lineup the 4 locking tabs on the belt and brush cover with the slots on the power nozzle and push in. (Fig. 54)
Changing the Headlight WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/trouble shooting checks. Occasionally the headlight will require changing.
1.Turn the vacuum off and unplug from the electrical outlet.
2.With a flathead screw driver, insert the end of the screwdriver into the two slots on top of the headlight lens and gently pull down. (Fig. 55)
Lens Slots
Fig. 55
3.Lift out the headlight lens.
4.Remove the light bulb by pulling it out carefully.
5.Replace the new bulb by pushing it in.
6.To replace the headlight lens, insert the bottom tabs of the lens into the holding slots and snap the top back into place to secure.
VERTICALE
Fig. 54
12.Rotate the locking screws clockwise to tighten.
1.Poignée
2.Tube Télescopique
3.Poignée de Transport
4.Bouton de Dégagement de la Porte Inférieure du Collecteur Cyclone.
5.Collecteur Cyclone
6.Bac à Poussière
7.Écran de Débris
8.Lumière d’Indicateur du Filtre
9.Lumière
10.Bouton d’Ajustement de la Hauteur du Tapis
11.
12.Déclencheur de Poignée
13.Sélecteur
14.Support du Tube Inférieur
Spécifications Techniques
Voltage : | 120V, 60Hz. |
Alimentation : | 12 A |
15.Tuyau Super Extensible
16.Suceur Plat
17.Brosse à Meubles
18.Brosse à Épousseter
19.Bouton de Dégagement du Bac à Poussière
20.Port de Rinçage du Collecteur Cyclone
21.Support du Tube Supérieur
22.Support de Dégagement Rapide du Cordon d’Alimentation
23.Dégagement du Tube Télescopique
24.Support du Cordon d’Alimentation
25.Bouton Marche/Arrêt
26.Brosse pour Planchers
27.Brosse Puissante pour Poils d’Animaux
Remarque: * Les illustrations peuvent différer du produit exact.
14 | 35 |
|
