InFocus 5700 manual Connector Panel

Connector Panel

The projector provides eight discreet video connectors:

•two component RCA

•two S-video

•one composite RCA

•one M1-DA (HD, DVI, and computer)

•one VESA (HD, HD component, and computer)

•one component D5

It also has a mini-jack input for a Niles or Xantech-compatible IR repeater and an RS-232 connector for serial control. The Command Line Interface (CLI) specifications and commands are listed in the Appendix starting on page 36.

Two 3.5 mm mini-jack triggers provide 12 volt current. Trigger 1 provides a constant output while the projector is on. If you connect your projection screen to Trigger 1, when you turn on the projector the screen will move down; when you turn the projector off, the screen will return to the storage position. Trigger 2 provides a 4:3 aspect trigger. When you select 4:3 in the Aspect Ratio menu or from the Resize button on the remote, a 12v signal will be sent after a three second delay. Use this trigger for screens with 4:3 aspect curtains. When you switch back to 16:9 format, the curtains open to reveal the entire screen.

For details on each connector type and their inputs, see page 34.

	IR input				D5	remote control
video/computer				video		receiver (IR)
					video
1 & 2			s-video			12v triggers
		Y	1	Y
	IR in				D5 8	trigger 1
M1-DA 1	vesa 2	Pb	2	Pb 7
				video
		Pr		Pr		trigger 2
			4
	serial control
			5
			s-video
		3
		component
power		component
connector	serial					lock
		video

connector

screen trigger connection

+12v

ground

3.5mm mono plug

to screen relay (see screen manufacturer for details)

4