InFocus DH 24PC Specifications, Standard Accessories, Drilling anchor holes rotation + striking

English

SPECIFICATIONS

Voltage (by areas)*	(110V, 115V, 120V, 127V, 220V, 230V, 240V)
Power Input	620W*
No-load speed	0 – 1350/min.
Full-load impact rate	0 – 4400/min.
Capacity: concrete	3.4 – 24 mm
steel	13 mm
wood	32 mm
Weight (without cord and side handle)	2.4 kg

*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1)	Case (Molded plastic)	1	Standard accessories are subject to change without
(2)	Side handle	1	notice.
(3)	Depth gauge	1

OPTIONAL ACCESSORIES (sold separately)

1.Drilling anchor holes (rotation + striking)

◯ Drill bit (Slender shaft)

Drill bit (Slender shaft)	Adapter for	slender shaft
	(SDS-plus shank)
Drill bit (slender shaft)
Outer diameter	Effective length	Overall length
3.4 mm	45 mm	90 mm
3.5 mm

◯Drill bit (Taper shank) and taper shank adapter

Drill bit (Taper shank)	Taper shank adapter
	(SDS-plus shank)

Outer diameter

11.0mm

12.3mm

12.7mm

14.3mm

14.5mm

17.5mm

21.5mm

Cotter

Taper mode	Applicable drill bit
Morse taper (No.1)	Drill bit (taper shank)	11.0 – 17.5 mm
Morse taper (No.2)	Drill bit (taper shank)	21.5 mm
A-taper	Taper shank adapter formed A-taper or B-taper
	is provided as an optional accessory, but the
B-taper
	drill bit for it is not provided.

6