InFocus DS 12DM Specifications, Applications, Standard Accessories, Battery REMOVAL/INSTALLATION

English

SPECIFICATIONS

POWER TOOL

Model			DS9DM			DS12DM
No-load speed (Low/High)			0 – 330 / 0 – 1150 min–1			0 – 350 / 0 – 1200 min–1
		Wood	21 mm			27 mm
		(Thickness 18 mm)
	Drilling
		Metal	Steel: 10 mm,			Steel: 13 mm,
Capacity		(Thickness 1.6 mm)	Aluminum: 10 mm			Aluminum: 13 mm
		Machine screw	6 mm			6 mm
	Driving	Wood screw	6.2 mm (diameter) ⋅ 56 mm (length)			6.8 mm (diameter) ⋅	50 mm (length)
			(Requires a	pilot	hole)	(Requires a	pilot hole)
			EB9B : Ni-Cd 9.6	V (2.0	Ah, 8 cells)	EB1220BL : Ni-Cd 12 V (2.0 Ah, 10 cells)
Rechargeable battery			EB926H : Ni-MH 9.6 V (2.6 Ah, 8 cells)			EB1226HL : Ni-MH 12 V (2.6 Ah, 10 cells)
			EB930H : Ni-MH 9.6 V (3.0 Ah, 8 cells)			EB1230HL : Ni-MH 12 V (3.0 Ah, 10 cells)
Weight			1.5 kg			1.7 kg

CHARGER

Model	UC14YFA	UC18YG
Charging voltage	7.2 – 14.4 V	7.2 – 18 V
Weight	0.6 kg	0.3 kg

APPLICATIONS

◯Driving and removing of machine screws, wood screws, tapping screws, etc.

◯Drilling of various metals.

◯Drilling of various woods.

STANDARD ACCESSORIES

	..................1 Plus driver bit (No. 2)		1
DS9DM
	2	Charger (UC14YFA or UC18YG)	1
DS12DM
	3	Plastic case	1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

1.Battery (EB914, EB9B, EB9H, EB926H, EB930H) (For DS9DM)

2.Battery (EB1214L, EB1220BL, EB1222HL, EB1226HL, EB1230HL) (For DS12DM)

Optional accessories are subject to change without notice.

BATTERY REMOVAL/INSTALLATION

1.Battery removal

Hold the handle tightly and push the battery latch

to remove the battery (See Figs. 1 and 2).

CAUTION

Never short-circuit the battery.

2.Battery installation

Insert the battery while observing its polarities (See Fig. 2).

CHARGING

〈UC14YFA〉

Before using the driver drill, charge the battery as follows.

1.Connect the charger’s power cord to a receptacle When the power cord is connected, the charger’s pilot lamp will blink in red (At 1-second intervals).

2.Insert the battery into the charger

Firmly insert the battery into the charger till it contacts the bottom of the charger and checking

the polarities as shown in Fig. 3.

CAUTION

If the batteries are inserted in the reverse direction, not only recharging will become impossible, but it may also cause problems in the charger such as a deformed recharging terminal.

3.Charging

When inserting a battery in the charger, charging will commence and the pilot lamp will light continuously in red.

When the battery becomes fully recharged, the pilot lamp will blink in red (At 1-second intervals.) (See

Table 1).

(1)Pilot lamp indication

The indications of the pilot lamp will be as shown in Table 1, according to the condition of the charger or the rechargeable battery.

7