InFocus IN20 manual Table of Contents

Table of Contents

Introduction	3
Positioning the projector	5
Projector and device connector guide	6
Connecting a computer source	9
Required computer connections	9
Optional computer connections	9
Displaying an image	10
Adjusting the image	11
Connecting a video device	12
Video device connections	13
Composite video connection	13
S-video connection	13
VESA connection	13
Component video connection	13
Shutting down the projector	14
Troubleshooting your setup	14
Using the remote control	22
Using the audio	23
Using the keypad buttons	24
Optimizing computer images	25
Presentation features	25
Optimizing video images	26
Customizing the projector	26
Using the menus	27
Picture menu	28
Advanced menu	29
Settings menu	31
Maintenance	35
Cleaning the lens	35
Replacing the projection lamp	35
Using the security lock	37

Important Operating Considerations for Safety

•Place the projector in a horizontal position no greater than 15 degrees off axis.

•Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents.

•Locate the projector at least 4' (1.2 m) away from any heating or cooling vents.

•Use only InFocus-approved ceiling mounts.

•Use only the power cord provided. A surge-protected power strip is recommended.

•Refer to this guide for proper startup and shutdown procedures.

•This product has a lamp which contains a very small amount of mer- cury. Wash hands after cleaning the area and handling the ruptured lamp. Dispose of it as required by local, state or federal ordinances and regulations. For more information see www.eiae.org.

•In the unlikely event of a lamp rupture, particles may exit through the projector side vents. When the projector is turned on, keep people, food, and drinks out of the "keep out" area under and around the pro- jector, as indicated by the "X" areas below.

			m	3’	/	1 m					m
8’ /	2.4		.5
			1
		m	/							.6
			’
			5
										0
						3’	/		/
							1	m	’
									2

Follow these instructions to help ensure image quality and lamp life over the life of the projector. Failure to follow these instructions may affect the warranty. For complete details of the warranty, see the Warranty booklet.

2