38
Replacing the color wheel
The color wheel of your projector is user replaceable. The color wheel which was
installed by the factory is designed for maximum color brightness and has 6 color
segments (RYGCWB). The optional color wheel which came as an accessory is
designed for fully saturated color and contains 6 color segments (RGBCMY). Follow
the instructions below to replace your color wheel.
1Turn the projector off and unplug the power cord.
2Wait 60 minutes to allow the projector to cool thoroughly.
3Loosen the captive screw on the color wheel cover and lift the door up.
4Loosen the 4 color wheel screws which are marked by arrows.
5Remove the color wheel.
6Align the new color wheel and tighten the 4 captive screws.
7Replace the color wheel cover and tighten the captive screw.
8Plug in the power cord, turn on the power switch and press the Power button
to turn the projector back on. Note: Connection to a circuit with a minimum of
20A capacity is recommended.
Turn of f a nd
unplug projector
Wait 60
minutes
(1) (2)
©
(4)
(3)
(5)
(7)
(6)