PhotoBooth Assembly Page 11
Preparing the Camera
Note: For this section, you will need the Canon AC adapter kit, the Canon camera, camera lens
and an SD card (required).
1. Insert a SD card (not included) into the camera’s SD slot on the right-hand side of the
camera, being careful to align the SD card appropriately.
2. Attach the lens, by aligning the dots and turning the lens clockwise until an audible click is
heard.
3. Set the Lens Focus Mode Switch located on the lens to AF.
4. Using the Canon adapter kit, plug the AC adapter into the DC coupler.
5. Open the battery door located on the bottom of the camera and insert the DC coupler into
the battery slot.
6. Close the battery door, being careful to route the AC adapter cable through the slot in the
door.
AC Adapter
AC Power Cord
DC Coupler
Lens Focus
Mode Switch
Battery Door
SD Slot
Power Switch
Mode Dial