Page 14 PhotoBooth Assembly
Taking a PhotoBooth Photo
1. Turn Mondopad ON.
2. Turn the camera’s power switch to ON and the Mode Dial to M (“Manual”).
3. Turn the flash unit’s power switch to the ON position.
4. Verify that the Cell button LED is off. If the Cell button LED is lit, press the Cell button to turn
it off.
5. Press the receiver’s power button and slide the slider from Hold to Ready.
6. Slide the wireless transmitter button to Single/Bulb.
7. When ready, click the transmitter button. The image will be saved on the SD card and in the
View & Share > PhotoBooth folder.
Cell Button
Power Switch