Connecting AC Power
1)Connect one end of the AC power cord to the AC In jack on the back of the monitor.
2)Connect the other end of the AC power cord to an AC outlet.
3)Press the power switch. (The LED on the front of the monitor turns on.)
NOTES:
•Your monitor should only be operated from the power source indicated on the label.
•Always unplug the AC power cord from the power outlet when you are not using your monitor for an extended period of time.
Turning the Monitor On/Off
1)Verify that the power cord is connected to a power outlet and that the power switch is ON.
2)Press the Power button on the remote or the right side of the monitor. (The LED on the front of the monitor turns off.)
NOTES:
If the monitor becomes locked and does not respond to normal power down procedures, the monitor can be powered down by pressing and holding the PC box Power button (located on the back of the monitor) for
By default, the monitor will time out at 10 minutes and go into system standby after 20 minutes of inactivity. Power settings for the monitor can be changed in Windows Control Panel> Hardware and Sound > Power Options.
INF7011 Hardware Guide | Page 9 |
