InFocus LP 820, LP 815 manual Projector can be managed by ProjectorNet networking software

If you are using a desktop computer and want to see the image on your

computer screen as well as on the projection screen, plug the monitor cable connect monitor cable to the Monitor out connector on the projector.

If you prefer connecting your computer to the projector with an optional M1-D cable, connect one end of that cable to the M1 port on your computer, and connect the other end to the Computer 1 connector on the projector.

connect M1-D cable

trigger

network mouse USB	computer 1	computer 2	monitor out
		computer 3	serial control
I		computer in
O

You can control the projector from an LCD control panel or computer by

connecting an RS-232 cable to the projector’s Serial connector. Specific

RS-232 commands can be found in the Service and Support section of our connect RS-232 cable website.

I O

trigger

network mouse USB	computer 1	computer 2	monitor out
		computer 3	serial control
		computer in

The projector can be managed by ProjectorNet networking software	connect network cable
through its Network connector.
Contact an authorized dealer or visit our website for information on	Network
ProjectorNet.

I O

8