Video Standard: when set to Auto, the projector attempts to automatically pick the video standard based on the input signal it receives. (The video standard options may vary depending on your region of the world.) If the projector is unable to detect the correct standard, the colors may not look right or the image may appear “torn.” If this happens, manually select a video standard by selecting NTSC, PAL, or SECAM from the Video Stan- dard menu.
Active Iris: when on, the projector monitors the image brightness and modi- fies the light output if the image is dark, which improves black levels. In Presentation mode, it looks at peak brightness, in Theater mode it looks at average brightness.
Overscan: (Computer 1 and video sources only) removes noise around the video image.
The following 4 options are for computer sources only:
Phase: adjusts the horizontal phase of computer 2, 3 and component (except 480i and 576i) sources.
Tracking: adjusts the horizontal scan of a computer source (except Computer 1).
Horizontal / Vertical Position: adjusts the position of a computer source (except Computer 1) and Video 1 source (except 480i and 576i).
Resolution: When this feature is set to Auto, the projector attempts to pick the resolution standard based on the input signal it receives. If the projector is unable to detect the correct standard, the resolution may look odd. If this happens, manually select the resolution from the menu which matches your source signal.
Computer 2: allows you to turn Sync on Green on for this source.
Computer 3: allows you to turn Sync on Green on for this source.
Closed Captions: can be shown when the source is analog - component (480i only), or
On: Always display captions. Off: Never display captions. Channel: Selects which captions to display.
.
Video Standard
Active Iris
Computer 2 | Computer 3 |
|
30
