Adjusting the image
Adjust the height of the projector, if necessary, by pressing the release but- tons on each side of the projector’s front to extend the elevator feet.
Position the projector the desired distance from the screen at a 90 degree angle (perpendicular) to the screen.
See page 41 for a table listing screen sizes and distances.
Adjust the zoom by rotating the Zoom ring inside the lens door until the desired image size is produced.
Adjust the focus by rotating the Focus ring on the lens until the desired focus is produced.
If the image is not on the screen or viewing area, adjust it by using the lens shift dials inside the lens door.
Use the right dial to shift the lens left or right. Use the left dial to shift the lens up or down.
Adjust the Contrast or Brightness in the Picture menu.
See page 27 for help with the menus.
adjust height | release |
| button |
| elevator |
| foot |
adjust distance |
|
adjust zoom and focus
adjust lens shift
adjust Contrast or Brightness
release button
elevator 
foot
contrast
brightness
11
