JVC KS-FX942R manual What you can do more with DAB, To use Alternative Reception, English

What you can do more with

DAB

Tracing the same program automatically (Alternative Reception)

You can keep listening to the same program.

•While receiving a DAB service:

When driving in an area where a service cannot be received, this unit automatically tunes in to another ensemble or FM RDS station, broadcasting the same program.

•While receiving an FM RDS station:

When driving in an area where a DAB service is broadcasting the same program as the FM RDS station is broadcasting, this unit automatically tunes in to the DAB service.

Note:

When reception switches between DAB and FM, the listening volume level may increase or decrease inconveniently. This change in the volume level results from unequal audio injection levels at broadcaster site, but not from the malfunction of this unit.

To prevent this inconvenience, you can adjust the DAB volume level (see the right column).

To use Alternative Reception

When shipped from the factory, Alternative Reception is activated.

•See also “Changing the general settings (PSM)” on page 25.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press ¢ or 4 to select “DAB AF” (alternative frequency).

3Turn the control dial to select the desired mode.

•AF ON: Traces the program among DAB services and FM RDS stations

—Alternative Reception. The AF indicator lights up on the display (see page 12).

•AF OFF: Alternative Reception is deactivated.

4Press SEL (select) to finish the setting.

Note:

When Alternative Reception (for DAB services) is activated, Network-Tracking Reception (for RDS stations: see page 12) is also activated automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Reception.

To adjust the DAB volume level

You can adjust the volume level of DAB tuner and store it in memory. By adjusting the volume level properly to match it to the FM sound level, you will not need to adjust the volume level each time you change the source.

When shipped from the factory, DAB volume level is set at “00.”

•See also “Changing the general settings (PSM)” on page 25.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press ¢ or 4 to select “DAB VOL” (DAB volume).

3Turn the control dial to set to the desired volume.

You can set it from “VOL –12” to “VOL 12.”

4Press SEL (select) to finish the setting.

ENGLISH

39