Operation 35
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions
available when User 1 or User 2 is selected. You can make adjustments to these
functions based on your needs.

Adjusting Brightness

Highlight Brightness in the PICTURE menu and
adjust the values by pressing / on the
projector or remote control.
The higher the value, the brighter the image. And
lower the setting, darker the image. Adjust this
control so the black areas of the image appear
just as black and that detail in the dark areas is
visible.

Adjusting Contrast

Highlight Contrast in the PICTURE menu and
adjust the values by pressing / on the
projector or remote control.
The higher the value, the greater the contrast.
Use this to set the peak white level after you have
previously adjusted the Brightness setting to suit
your selected input and viewing environment.

Adjusting Color

Highlight Color in the PICTURE menu and adjust the values by pressing / on
the projector or remote control.
Lower setting produces less saturated colors; setting to the minimum value makes
the image black and white. If the setting is too high, colors on the image will be
overpowering, which makes the image unrealistic.

Adjusting Tint

Highlight Tint in the PICTURE menu and adjust the values by pressing / on
the projector or remote control.
The higher the value, the more reddish the picture becomes. The lower the value,
the more greenish the picture becomes.

Adjusting Sharpness

Highlight Sharpness in the PICTURE menu and adjust the values by pressing /
on the projector or remote control.
The higher the value, the sharper the picture becomes. The lower the value, the
softer the picture becomes.
+50
+30 +70
+50
+30 +70