Operation38
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to
utilize this function:
1. Go to the SYSTEM SETUP: Basic >
Presentation Timer menu and press Mode/
Enter to display the Presentation Timer
page.
2. Highlight Timer Period and decide the time
period by pressing / . The length of time
can be set from 1 to 5 minutes in 1-minute
increments and 5 to 240 minutes in 5-minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3. Press to highlight Timer Display and choose if you want the timer to show
up on the screen by pressing /.
4. Press to highlight Timer Position and set the timer position by pressing
/.
Top-Left Bottom-Left Top-Right Bottom-Right
5. Press to highlight Timer Counting Direction and select your desired
counting direction by pressing / .
6. Press to highlight Sound Reminder and decide if you want to activate
sound reminder by pressing / . If you select On, a double beep sound will
be heard at the last 30 seconds of counting down/up, and a triple beep sound
will be produced when the timer is up.
7. To activate the presentation timer, press and press / to highlight On
and press Mode/Enter.
8. A confirmation message displays. Highlight Yes and press Mode/Enter to
confirm. You will see the message “Timer is On” displaying on the screen.
The timer start counting at the time the timer is on.
Selection Description
Always Displays the timer on screen throughout the presentation time.
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).
Never Hides the timer throughout the presentation time.
Selection Description
Count Up Increases from 0 to the preset time.
Count down Decreases from the preset time to 0.
Presentation Timer
Timer Display
Timer Position
Timer Counting Direction
Sound Reminder
Always
Top-Left
Count Down
Off
On Off
MENU Back
Timer Period 15