Infrasonic BLOW5, BLOW5D 3. INSTALLATION

BLOW5/BLOW5D User’s Manual
8
3. INSTALLATION
3.1. POSITIONING SPEAKERS
IMPORTANT NOTES
 Be careful not to grab or touch the speakers when in use. Damage may occur.
 Do not put anything on the unit.
 When the speaker is in operation. The heat sink in the rear side will be hot.
Take care not to touch it.
 The heat sink which is behind of unit is sharp. You can be harmed with it. Be careful to handle it
Positioning monitor speakers correctly in the control room is very important to their performance. In order
to monitor with your speaker units at their maximum capability, appropriate listening environment and
correct placement are required. Please see our suggestions.
Two speaker units and the listener
should align to form a regular triangle.
Refer to the following diagram.
The height of the units - The top of the
woofer should come up inline with your
ears, in your listening environment.
(Refer to the following diagram.)
< Height of unit >
< Positioning >