TROUBLE SHOOTING
Product discharged from exhaust outlet.
SCheck for diaphragm rupture.
SCheck tightness of diaphragm nut.
Air bubbles in product discharge.
SCheck connections of suction plumbing.
SCheck “O” rings between intake manifold and fluid caps.
SCheck tightness of diaphragm nut.
Low output volume, erratic flow, or no flow.
SCheck air supply.
SCheck for plugged outlet hose.
SCheck for kinked (restrictive) outlet material hose.
SCheck for kinked (restrictive) or collapsed inlet material hose.
SCheck for pump cavitation - suction pipe should be sized at least as large as the inlet thread diameter of the pump for proper flow if high viscosity fluids are being pumped. Suction hose must be a
SCheck all joints on the inlet manifolds and suction connections. These must be air tight.
SInspect the pump for solid objects logged in the diaphragm chamber or the seat area.
DIMENSIONAL DATA
Dimensions shown are for reference only, they are shown in inches and millimeters (mm).
K E
Outlet
K
F F
M | Inlet | |
G | ||
|
H
Figure 6 | |||
| |||
N Bolt Circle | A |
| |
|
|
Outlet
B
D
Inlet
L J
C
May be tapped for 1” pipe.
|
|
|
| 1/4 - 18 N.P.T. Air Inlet | |||||
|
|
|
| DIMENSIONS |
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |||||
|
|
| |||||||
A | (331 mm) | ||||||||
B | |||||||||
C | (252 mm) | ||||||||
D | (59 mm) | ||||||||
E | (201 mm) | ||||||||
F | 16” (406 mm) | 16” (406 mm) | |||||||
G | (126 mm) | ||||||||
H | |||||||||
J | 7/16” (11 mm) | 7/16” (11 mm) | 7/16” (11 mm) | 7/16” (11 mm) | 7/16” (11 mm) | 7/16” (11 mm) | |||
K | 15/16” (23 mm) | 29/32” (23 mm) | 2” (51 mm) | 1” (25 mm) | |||||
L |
|
|
|
|
|
| |||
M | 1/2” (13 mm) | 1/2” (13 mm) | 1/2” (13 mm) | 1/2” (13 mm) | 1/2” (13 mm) | 1/2” (13 mm) | |||
N | 3.140” (80 mm) | 3.097” (79 mm) |
|
|
| 3.140” (80 mm) | 3.097” (79 mm) | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PN | |
|
|
|
|
|
|
|
|
| |
PAGE 8 OF 8 |
|
|
|
|
|