Ingersoll-Rand PE30X-XXX-XXX-C, PD30X-XXX-XXX-C Xxx-Xxx-C, Screw, 40 50 in. lbs 4.5 5.6 Nm

PARTS LIST / PX30X-XXX-XXX-C AIR MOTOR SECTION

j Substitute these “O“ rings for				PILOT VALVE
(166) gasket on models PX30S-	118 ￿ 169	168	￿
XXX-XXX-C.				PART GROUP
147 ￿				172 ￿
146 ￿	￿ 174			171￿
	121			170

￿173

	167					173 ￿
140	199 ￿ 244 ￿ 243			￿ 233 132	￿ 166	121
						￿￿
						118
						174 ￿
135						103
						101
133
￿￿134
43	141 ￿ ￿ 200		241 ￿ 128 ￿ 240 ￿￿ 176 ￿
	138	￿
				Optional 94117 Muffler
	111
	139	￿
￿ 137	242	￿		201
136	128	￿		127
	105	￿￿

MAJOR VALVE

Figure 3

)ASSEMBLY TORQUE REQUIREMENTS (

NOTE: DO NOT OVERTIGHTEN FASTENERS.

ALL FASTENERS ARE METRIC.

(105)screw, 40 - 50 in. lbs (4.5 - 5.6 Nm).

(134)screw, 40 - 50 in. lbs (4.5 - 5.6 Nm).

(240)screw, 40 - 50 in. lbs (4.5 - 5.6 Nm).

LUBRICATION / SEALANTS

cApply Lubriplate FML-2 grease to all “O” rings, “U” cups and mat- ing parts.

dApply Loctite 271 to threads.

eApply anti-seize compound to threads and bolt and nut flange heads which contact pump case when using stainless steel fas- teners.

A replacement major valve service assembly is available separately, which includes the following:

637374-2 for models PD30A-XXX-XXX-C: 105 (4), 111, 128 (2), 132, 133 (3), 134 (4), 135, 136, 137, 138, 139, 140, 141, 166, 176 (2), 199, 200, 233, 240 (2), 241, 242, 243 and 244.

637374-3 for models PE30A-XXX-XXX-C: 76, 105 (4), 111, 128 (2), 132, 133 (3), 134 (4), 135, 136, 137, 138, 139, 140, 141, 166, 176 (2), 199, 200, 233, 240 (2), 241, 242, 243 and 244.

637374-4 for models PD30S-XXX-XXX-C: 105 (4), 111, 128 (2), 132, 133 (3), 134 (4), 135, 136, 137, 138, 139, 140, 141, 146, 147, 176 (2), 199, 200, 233, 240 (2), 241, 242, 243 and 244.

637374-5 for models PE30S-XXX-XXX-C: 76, 105 (4), 111, 128 (2), 132, 133 (3), 134 (4), 135, 136, 137, 138, 139, 140, 141, 146, 147, 176 (2), 199, 200, 233, 240 (2), 241, 242, 243 and 244.

PD30X-XXX-XXX-C (en) Page 7 of 8