Ingersoll-Rand PH30F-XXX-XXX-C manual Torque Sequence, Assembly Torque Requirements

PARTS LIST / PH30F-XXX-XXX-C FLUID SECTION

		61	FOR THE AIR MO-
			TOR SECTION, SEE
		26 ￿￿	PAGES 6 & 7.
22
21	68 ￿	77
19 ￿	181	175 ￿	144 ￿
		70 ￿	70 ￿ 1 5
			196	7	6	9

15

31

58

76

24

Torque Sequence

76

19 ￿

78

22	175 ￿
19 ￿	144 ￿
21	126 ￿

29 69

60

26 ￿￿

32

View for PH30F-XXX-XXT-C (PTFE diaphragm)

configuration only.

(Santoprene) 8

(PTFE) 7

		15a
		77
180 131 ￿￿	3 ￿	27	￿￿
		14 ￿￿
		19	￿
		76

Figure 2

)ASSEMBLY TORQUE REQUIREMENTS (

NOTE: DO NOT OVERTIGHTEN FASTENERS.

ALL FASTENERS ARE METRIC.

(14)Cap screw, 65 - 70 ft lbs (88.1 - 94.9 Nm).

(26)Manifold screw, 60 - 70 ft lbs (81.4 - 94.9 Nm).

(27)Fluid cap screw, 60 - 70 ft lbs (81.4 - 94.9 Nm).

(131)Screw, 35 - 40 ft lbs (47.5 - 54.2 Nm).

LUBRICATION / SEALANTS

fApply Lubriplate FML-2 grease to all “O” rings, “U” cups and mating parts. g Apply Loctite® 262™ to threads at assembly.

h Apply PTFE tape to threads at assembly. i Apply Loctite 271™ to threads.

j Apply anti-seize compound to threads and bolt and nut flange heads which contact pump case when using stainless steel fasteners.

k Apply 1/4” wide x 1/8” thick (aproximately 46” long) expandable PTFE

Joint Sealant to air cap (item 68 only) diaphragm bead groove. Use

ONLY 1 wrap of sealant. DO NOT overlap seam. Fill seam with heavy duty anaerobic pipe sealant. Seam to be located between bolt positions 1 and 3 (refer to “Torque Sequence” diagram).

Lubriplate FML-2 is a white food grade petroleum grease.

PH30F-XXX-XXX-C (en) Page 5 of 8