Inova PD008310103.001 AB user manual Getting Started, GigaPACK, Screw, Existing Graphics Card

Getting Started GigaPACK

3

SCREW

H

EXISTING GRAPHICS CARD

Remove any existing graphics board from your computer (if the GigaCHAMPION is designed to replace it!) or disable the on-board graphics capability on the motherboard. You may have to refer the documentation that came with your computer to perform this step. If removing an existing PCI card remember to save the locking screw.

4

IONVA GigaCHAMPION™

VIDEO CARD

PCI SLOT

Locate the PCI graphics slot and if necessary, remove the metal dust cover. Grasp the GigaCHAMPION by the top edge and position it over the PCI slot ensuring that the contacts are aligned and then press it in until it is fully seated.

Page1-4 ©2002 Inova Computers GmbH Doc. PD008310103.001