2.Slowly turn the LEVEL potentiometer until the picture on the monitor is as clear as possible and is not too bright.
Video Drive (VSD) Lens
Set the VSD/DC switch on the rear of the camera (see Figure 3) to VSD.
Exposure Mode
Automatic Exposure Mode
The Electronic Exposure feature compensates for excessive light levels by automatically adjusting the shutter speed of the camera. Set the EE/ME switch to EE (recommended setting).
Manual Exposure Mode
Set the EE/ME switch to ME. This setting is typically used only in machine vision applications. The table below gives the shutter speeds for the switch settings.
Switch Label
Shutter FL BLC AES/AI speed(s)
EE
ME
AES 
AI
OFF 
BLC
OFF 
FL
OFF 
AGC
OFF 
WB3
OFF 
WB2
OFF 
WB1
LEGEND | = ON |
= OFF
1/50 (PAL) | OFF | ON | OFF |
1/60 (NTSC) |
|
|
|
|
|
|
|
1/100 (PAL) | ON | ON | OFF |
1/120 (NTSC) |
|
|
|
|
|
|
|
1/250 | OFF | OFF | OFF |
|
|
|
|
1/500 | ON | OFF | OFF |
|
|
|
|
1/1000 | OFF | ON | ON |
|
|
|
|
1/2000 | ON | ON | ON |
|
|
|
|
1/4000 | OFF | OFF | ON |
|
|
|
|
1/10000 | ON | OFF | ON |
Caution Before you adjust the shutter speed, it is important that you understand how the settings can affect the scene detail.
Rev 3 | 5 | |
|
| 02/07 |