Auto White Balance Control (AWC)
This mode covers a wider range of 2000°K to 10000°K and performs at a faster operating speed than ATW mode. This mode is typically used for outdoor applications or where variable lighting conditions exist.
One Push Lock
Press PUSH LOCK on the rear of the camera to calibrate the white balance for the current scene. This mode is typically used for scenes with constant lighting conditions.
Synchronization Selection (LL/INT)
This switch selects the synchronization mode of the camera. When the camera is connected to an AC supply, the Line lock (LL) mode is used to lock the camera’s frame rate to the frequency so that each camera in the system is triggered at the same point on the supply’s AC cycle. The default setting is LL.
WARNING! The LL/INT switch must be set to INT when operating from 12 VDC.
|
|
|
| VIDEO | |
PUSH |
| IRIS |
|
|
|
LOCK | LEVEL |
|
| ||
|
| PWR |
|
| L/L |
|
|
| EE | ME |
|
|
|
| AES | AI |
|
|
|
|
| BLC | INT |
|
|
|
| FL | VSD |
|
|
| OFF | AGC | |
|
|
|
| ||
|
|
|
| WB3 |
|
| + | - |
| WB2 | DC |
AC 24V | GND | WB1 | |||
DC 12V |
|
|
|
|
|
L/L
INT
Rev 3 | 7 | |
|
| 02/07 |