Completing the Installation

Mounting the Camera

Mounting points are provided on the top of the camera for mounting the camera on a bracket or tripod. They are designed to accept standard sized 1/4 x 20 mounting screws. This bracket can be unscrewed and mounted onto the opposite side of the camera, depending on your application. The mounting bracket must be capable of supporting the weight of the camera and its lens.

Note Some installation codes dictate that the mounting bracket must be capable of supporting up to four times the combined weight of the camera and lens.

Figure 6 Camera Mount

Unscrew 3 bracket securing screws and then resecure the bracket on the other side of the camera.

Rev 3

11

G-113077-001

 

 

02/07