Insignia HCC334L Setting Up Your Camera, Selecting the Lens, Manual Lens, Vari-focalAuto Iris Lens, Direct Drive (DC) Lens

Setting Up Your Camera

Figure 3 shows the factory set DIP switch settings. Automatic Gain Control (AGC) and Auto White Balance Control (AWC) are set ON.

Figure 3 Factory Set DIP Switch Settings

IRIS

LEVEL

		VIDEO		EE	ME
LOCK	LEVEL V-PH			AES	AI
PUSH	IRIS
	PWR		L/L	OFF	BLC
	EE	ME
	AES	AI		OFF	FL
		FL	INT
		BLC
	OFF	AGC	VSD			VSD
		WB2		OFF
		WB3			AGC
+	-	WB1	DC
				OFF	WB3
				OFF	WB2
				OFF	WB1	DC

= ON = OFF

Selecting the Lens

Manual Lens

Set the EE/ME DIP switch on the rear of the camera (see Figure 3) to EE. Set the AES/AI switch to AES. EE and AES are the typical settings.

Vari-focal Auto Iris Lens

Vari-focal Auto Iris lenses (Direct Drive [DC] or Video Drive [VSD]) are connected to the camera via a 4-pin square socket located at the side of the camera. Set the AES/AI DIP switch to AI. EE and AI are the typical settings.

To set a different exposure, see Exposure Mode on page 5.

Direct Drive (DC) Lens

1.Set the VSD/DC switch on the rear of the camera to DC. Set the AES/AI DIP switch to AI.

Rev 3	4	G-113077-001
		02/07