Routine Maintenance

Use regular liquid cleaners to remove most dirt and grime from the HD16 enclosure.

Caution Do not use harsh or abrasive cleaners which can scratch the polycarbonate dome and reduce visibility from the camera.

Dome Replacement

If the polycarbonate dome is damaged or scratched beyond use, contact your distributor or salesperson to order a dome replacement. To replace the HD16 dome:

1.Use the security hex key (supplied) to loosen the #8-32 security screws securing the HD16 lid to the base.

2.Use a Phillips screwdriver to remove the #6 x 1/4 inch Hi-lo tapping screws that attach the dome retainer plate to the front cover.

3.Remove the damaged dome and replace it with the new dome.

4.Use a Phillips screwdriver to attach the dome retainer plate to the HD16 front plate with the screws you removed in step 2.

5.Use the security hex key to tighten the security screws that secure the HD16 lid to the base.

Figure 13 Dome replacement

#8-32 security screws (x4)

Front cover

Polycarbonate dome

Dome turret

Gasket

Retainer plate

#6 x 1/4 inch Hi-lo tapping screws (x4)

Document 900.0345 Rev 1.02

17

03/07