Installation

The HD16 Camera is designed to be flush or surface mounted on a wall or ceiling. It is weather sealed for indoor or outdoor locations.

Overview of Assembly Procedure

Task

See section

 

 

 

1.

Mount the HD16 to a ceiling or wall.

See “Mount the HD16” on page 8.

 

 

 

2.

Connect the cable to the camera

See “Connect the Power Cable” on

 

board.

page 9.

 

 

 

3.

Secure the gimbal into the HD16

See “Install the Camera Assembly”

 

base.

on page 10.

 

 

 

4.

Adjust the camera settings.

See “Adjust the Camera” on page 10.

 

 

 

5.

Secure the cover.

See “Secure the Camera and Dome

 

 

Enclosure” on page 16.

 

 

 

Figure 1 Installation Components

Skirt (optional)

HD16 base

Gimbal

HD16 dome cover

Document 900.0345 Rev 1.02

7

03/07