IS-CM100751 19-inch Color Monitor
4Insert the hooks into the guide holes.
5Slide the tilt/swivel stand toward the front of the monitor until the latch snaps into place.
6Turn the monitor and the stand upright.
To remove the tilt/swivel stand:
1Make sure that the power is turned off to the monitor.
2Set the monitor face down with the underside facing you. Be careful not to scratch the monitor screen.
3Press the latch, then pull the tilt/swivel stand toward the back of the monitor.
4Pull the stand away from the monitor.
To connect the video cable and power cord:
1Turn off your computer and monitor.
2Connect the VGA cable to your computer’s VGA port.
3Tighten the VGA connector’s thumbscrews to secure it to your computer.
4Plug the power cord into the AC receptacle located on the back of your monitor.
5Plug the other end of the power cord into an AC outlet.
VGA cable
Power cord
4 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
