Insignia IS-PA040717 Maintenance, Cleaning Discs, Basic Disc Play, Cleaning the Cabinet

CLEANING DISCS

!Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with a soft cloth should remove most particles. Wipe in a straight motion from the center to the edge.

!Never use thinner, benzine, record cleaner or anti-static spray on a com- pact disc. Such chemicals can damage its plastic surface.

MAINTENANCE

Cleaning the Cabinet

Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean.

Cleaning the Lens

A dirty lens will cause sound skipping and if the lens is very dirty, the CD may not work. Open the disc cover and clean the lens as below:

!Dust or Dry Particles

Using a camera lens brush/blower, blow on the lens several times and wipe it

lightly with the brush to remove dust. Blow on the lens one more time.

! Fingerprints

If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab starting from the middle and working to the outside edge.

BASIC DISC PLAY

This CD-player can play Audio Discs such as CD-Recordables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD.

1.Connect the earphones to the PHONES (GREEN) socket.

2.Press the OPEN button to open the CD compartment lid.

3.Adjust the VOLUME to minimum.

4.Insert the disc with the label side facing up.

5.Close the lid securely until a click is heard.

6.Press the PLAY button to start playing.

To Emphasize the bass sound

Set the BASS BOOST switch to the ON position. Note: The bass boost performance will depend on the VOLUME control setting.

HOLD Switch

This switch prevents accidental selection of an unwanted function during Playback or Stop mode. In the HOLD “ON” position, no function button on the unit can be operated (except OPEN). Moving the switch to the “OFF” position will allow the unit to return to normal operation.

Turning Power on and off

This unit has no ON/OFF switch. To turn on and off, press the following buttons. To turn on: Press >II PLAY/PAUSE (playback starts).

To turn off: Press ! STOP button once for standby mode. Press ! STOP button twice to turn off the power.

Auto power-off function

When the unit is stopped (standby mode) for approximately 30 seconds, the power will automatically turn off.

6 7