Insignia IS-PA040717 instruction manual Productspecifications, Pick Up, Audio, General

Models: IS-PA040717

1 7
Download 7 pages 15.17 Kb
Page 7
Image 7
PRODUCTSPECIFICATIONS

USING ANTI-SHOCK AND ULTIMATE SKIP PROTECTION FEATURE

PRODUCTSPECIFICATIONS

Note the “ NOTES ” indicator appears on display as being empty when the player is first activated. It immediately begins to store sound data in memory bank,

The indicator appears to be “ PICK UP ” when the data buffer is full.

When the laser loses tracking due to mechanical shock, the data stream into the memory is interrupted but the data output from the memory buffer continues. The sound is not interrupted. As the data is read from the memory,

the indicator changes from “ AUDIO ” to “ GENERAL ” .

Once the laser locks again on the CD track, the data stream is fed to the memory and joined to the previous data (see indicator changes) at higher speed.

CAUTION

If the unit is subject to excessive and continuous repeated shocks, it will cause the sound to skip. Also note the “ Manual background ” indicator will appear empty.

NOTES

#When the “ANTI-SHOCK” is operating, the battery consumption is higher because the disc rotates faster than normal and also the memory circuitry is activated.

#When the digital anti-shock function is switched “ON” or “OFF”, the sound will be interrupted. This is normal.

#Remember that conditions such as dirty, scratched or warped discs may cause skipping or noise thereby affecting performance of the “ANTI-SHOCK” system.

#Ultimate Skip Protection greatly reduces or eliminates skipping during active use. During active use, hold the compact disc player with the OPEN switch facing upward.

PICK UP

System

Laser diode

Properties

Error correction

AUDIO

D/A conversion Frequency response Wow and flutter No. of Channel Output level

Bass boost effect (100Hz)

GENERAL

Power requirements

Power consumption Dimension Weight

Compact disc digital audio system Material: GaAIAs

Wavelengh: λ =780mm

Emission duration: continuous

Laser output: < 44.6 W Cross-interleave Reed-solomon code

DAC four times oversampling 20-20,000Hz (+1/-3 dB) Below measurable limits

2 Channels (Stereo)

Phones: 15mW (32)

+6 dB

-2x “AA” alkaline battery

-DC in 6V 300 mA jack accepts AC power adaptor (not included) (center positive) with plug type EIAJ, center hole φ 1.7mm, out- side φ 4.0mm

0.8W (DC 3V) under normal condition Approx. 140 (W) x 28.5 (H) x 144 (D) mm Approx. 230g not including battery

12

13

Page 7
Image 7
Insignia IS-PA040717 instruction manual Productspecifications, Pick Up, Audio, General