Insignia IS-SP102371 Setting up your speakers, Front panel, Connecting the subwoofer, Back panel

IS-SP102371.fm Page 3 Friday, July 29, 2005 5:23 PM

IS-SP102371 Speaker System

Front panel Back panel

1LED

•Green in active (on) mode.

1• Red in standby mode (No audio signal has been received for fifteen minutes).

1 INPUT Connect to the Pre-out of an audio

1 output device.

2	2 Volume +/-
	Adjust to increase or

decrease the subwoofer level.

3 AC MAIN

Connect to the power outlet.

3

Setting up your speakers

Connecting the subwoofer

To connect the subwoofer:

1Use the supplied audio cable to connect the input jack to the PRE-OUT/ SUBWOOFER jack on the audio output device.

2After everything is correctly connected, plug the AC power cord into the AC power outlet.

Tip: Refer to the information plate on the rear or bottom of the audio system for identification and power supply ratings.

Important: Never make or change any connections while the power is on.

www.insignia-products.com3