Attaching the speaker stands
8
7
6
5
4
3
2
1
A B C D E F
Important! Prepare your speaker stand components before assembling them. The speaker stands should only be used for the FR, FL, SR, SL, and RC speakers.
To attach the speaker stands:
1Place the stand base on a flat, hard, and stable surface.
2Assemble the stand by following the numbered sequence shown in Figure A.
3Tighten the joint connectors and get the stand ready (Figure B).
4Slide the speaker over the housing bracket, then turn the screw clockwise to tighten it (Figure C). You can attach the speakers in vertical (Figure D) or horizontal (Figure E) orientation.
5Hide the speaker wire in the stand as shown in Figure F.