Connecting speakers
Insignia
Use the following illustration to connect an outside antenna.
To connect speakers to your TV:
1Unplug the TV power cord and all devices connected to your TV.
2Connect the speakers to the speaker jacks on the back of your TV. Make sure that you connect the black part of the speaker wire to the – jack and the red part of the speaker wire to the + jack on the back of your TV.
Red Black Black Red
Right speaker | Left speaker |
Note
The location of the speaker jacks on your TV may vary from the illustration.
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and 300 ohm.
75 ohm cable
If your antenna cable has a 75 ohm connector, connect the cable to the coaxial jack on the back of your TV.
If your antenna cable has a 300 ohm connector, connect the cable to a
| VHF/UHF | Combination antenna | |
| antenna |
| VHF/UHF |
|
|
| |
|
| OR | antenna |
|
|
| |
|
| ||
| with adapter | cable |
|
|
|
| Separate antennas |
|
| UHF |
|
|
| antenna |
|
Antenna |
|
| VHF |
|
| antenna | |
cable | Combiner |
| |
| OUT | IN |
|
|
| OR |
|
Connecting cable TV
Your TV has a 75 ohm jack for connecting cable TV.
Some cable TV providers scramble the signals for “premium” (pay) channels. To view these channels you need a converter/descrambler box.
If you do not have a converter/descrambler box, you can connect your cable TV directly to your TV. If you have a converter/descrambler box, you can connect your cable TV using an RF switch (not supplied). For more information about connecting a converter/descramble box, contact your cable TV provider.
To connect cable TV without a converter/descrambler box:
1Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV.
2Connect the other end of the cable to the cable TV wall outlet.
8 |