17
NS-39D220NA16/NS-43D420NA16/NS-50D420NA16/NS-50D420MX16 39"/43"/50" LED TV
www.insigniaproducts.com
AV (composite video) (good)
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an AV cable (not provided) to the green VIDEO/ Y jack and L and R AUDIO jacks on the back of your TV and
to the AV device and audio out jacks on the cable or satellite box.
4Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to highlight Component/AV, then press ENTER.
Notes
• Cables are often color-coded to match color-code d jacks.
• The yellow video connector on the AV cable connects to the green
VIDEO/ Y ja ck.
Important
•The VIDEO/ Y, PB, and PR video jacks (used to connect a com ponent
device) share the L and R AUDIO jacks with the VIDEO/ Y jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your cable or
satellite box supports it.
• When you connect the audio using the Land R AUDIO jacks, the audio
output is analog.
Cable or
satellite box
AV cab le
Back of TV
AV cab le
connector
AV jac k
Audio cable
connectors
Analog
audio jacks
On your TV
Cable
wall jack