21
NS-39D220NA16/NS-43D420NA16/NS-50D420NA16/NS-50D420MX16 39"/43"/50" LED TV
www.insigniaproducts.com
Component video (better)
1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2Connect a component video cable (not provided) to the VIDEO/ Y, PB, and PR jacks on the back of your TV and to
the COMPONE NT OUT jacks on the DVD or Blu-ray player.
3Connect an audio cable (not p rovided) to the L and RAUDIO jacks on the back of your TV and to the L and R AUDI O
OUT jacks on the DVD or Blu-ray player.
4Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to highlight Component/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Important
•The VIDEO/ Y, PB, and PR video jacks (used to connect a com ponent
device) share the L and R AUDIO jacks with the VIDEO/ Y jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your DVD or
Blu-ray player supports it.
When you connect the audio using the Land R AUDIO jacks, the audio
output is analog.
Back of TV
Audio cable
Component video cable
DVD or Blu-ray
player
Component
video cable
connectors
Audio cabl e
connectors
Component
video jacks Analog
audio jacks
On your TV