22
39"/43"/50" LED TV
www.insigniaproducts.com
AV (composite video) (good)
1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2Connect an AV cable (not provided) to the green VIDEO/ Y jack and L and R AUDIO jacks on the back of your TV and
to the AV OU T jacks on the DVD or Blu-ray player.
3Plug your TV’s power cord into a power outlet, then turn on your TV.
4Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to highlight Component/AV, then press ENTER.
Notes
• Cables are often color-coded to match color-code d jacks.
• The yellow video connector on the AV cable connects to the green
VIDEO/ Y ja ck.
Important
•The VIDEO/ Y, PB, and PR video jacks (used to connect a com ponent
device) share the L and R AUDIO jacks with the Y/VIDEO jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your DVD or
Blu-ray player supports it.
• When you connect the audio using the Land R AUDIO jacks, the audio
output is analog.
AV cabl e
Back of TV
AV cabl e
connector
AV jac k
Audio cable
connectors
Analog audio
jacks
DVD or Blu-ray
player
On your TV