Using composite video (good)To connect a cable or satellite box using composite video:

1Turn off your TV and all connected equipment.

2Connect the cable from the cable wall jack to the cable-in jack on the cable box.

3Connect an A/V cable (not included) between the AV IN 1 Y/VIDEO and AV IN 1 R-AUDIO-Ljacks on the back of your TV and the composite video and audio out jacks on the cable or satellite box.

Note

The AV IN 1 Y/VIDEO (composite video) jack shares the audio jacks with the COMPONENT IN 1 jacks.

Back of TV

A/V cable

Cables are often color-coded to match color-coded jacks. Note: The yellow connector on the AV cable plugs into the bottom green Y-VIDEOjack.

Cable or satellite box

4Turn on your TV, then turn on the cable or satellite box.

5Go through the setup wizard on page 20.

Using coaxial (good)To connect a cable or satellite box using coaxial:

1Turn off your TV and all connected equipment.

2Connect the cable from the cable wall jack to the cable-in jack on the cable or satellite box.

3Connect a coaxial cable (not included) between the ANT IN jack on the back of your TV and the coaxial out jack on the cable or satellite box.

Back of TV

Coaxial cable

Cable or satellite box

4Turn on your TV, then turn on the cable or satellite box.

5Go through the setup wizard on page 20.

Notes

•Use a coaxial cable to eliminate interference and noise from radio waves.

•Do not bundle the coaxial cable with the power cord or other cables.

www.insigniaproducts.com

13